Morey Enterprises Inc.
PO Box 407 Sugar Grove, IL 60554
(630) 466-7858 office and fax
Email: Racefab1320@aol.com
PARTS LIST 8/2/07
(Note: all prices listed are US dollars and are subject to change without notice.)
CUSTOM MADE PARTS / ECONOMICAL PRICES
Formula Indy Car Parts
Complete sway bar kit (front or rear): $295.00
Includes arms, sway bar, mounting brackets (require welding to chassis)
One kit does either front or rear not both.
Available in 1/2, 9/16 and 5/8 diameters
Sway bar diameter change kit (front or rear): $100.00
Includes 2 sway bar arm clamps, 2 sway bar bushings, 1 sway bar.
Replacement sway bar: $22.00
Front wings: $190.00 pair or $100.00 each
Aluminum with plastic side plates, 24" X 12" with 1" diameter mounting tube.
Front wing re-skin service. If your wings are dinged up from a hard season of racing, we can replace the outer, aluminum skin. $50.00 per wing.
Replacement plastic side plates. $6.00 each, $10.00 pair
Standard suspension bell cranks: $50.00
Aluminum with bronze pivot bushing. Hole spacing: 2" center/center and 3" center/center. Overall dimensions: 2 7/8" X 4" X 1 1/8
Custom made bell cranks available. Inquire for price.
Carburator air filter box. Prices start at $200.00
Carburator air filter box. Box allows filtered air a straight shot into the carbs. Less turbulence means more power. Custom designed and fabricated to your engine and chassis.
Morey Enterprises can design and fabricate many of the components on your car, call us with your needs. We can also design and fabricate a chassis or complete car. If you always wanted to design your own car, let us help your ideas become reality.
(Note: all prices listed are US dollars and are subject to change without notice.)
Where do you get that one of a kind part made?
Where do you get a current part modified or repaired?
Morey Enterprises Inc. offers fabrication and repair services for many forms of motor sports, vintage restorations, street rods or just about any type of project.
Morey Enterprises Inc. can help you with your project. From modifying current parts (nothing seems to fit correctly right out of the box) to fabricating from scratch, no job is too small. Big projects are also welcome, with computer aided design and many years of experience, we can design and fabricate frames to complete cars.
Mark Moreys experience has roots in midget cars, sprint cars, drag racing, Formula Indy cars, vintage restorations, street rods, hot rods, as well as experience from other industries. He knows first hand what it takes to build cars and components that hold up to the pressure of competition.
Small jobs or big projects are all welcome, if you need an entire chassis designed and built or just a simple welding repair, then give a call. Fast service for all of your fabrication needs.
Contact Mark today for more information:
Morey Enterprises Inc.
PO Box 407 Sugar Grove, IL 60554
(630) 466-7858 office and fax
Email: Racefab1320@aol.com
MIDGET CAR PARTS
Ford Focus (2 liter, DOHC) Sportsman Parts
Header $250.00
1 ½ O.D. primary pipes, 3 collector. Jig welded. This header works well with stock or slightly modified motors.
(-$40 if customer supplies stock Focus header for flange plate)
Custom headers available, built to order. 1 5/8 or 1 3/4 O.D. primary pipes, stepped primary pipes, merge collector, crank case evac., etc. Inquire for price.
Convert stock intake manifold/throttle valve for mechanical fuel injection. $150.00
A low cost alternative to expensive fuel injection units. It works very well on a stock or slightly modified engine. Conversion includes stripping off all unnecessary items from intake/throttle valve, blocking off all unneeded vacuum ports, installing injector bungs (1/8 NPT pipe threads), fabricating a barrel valve mounting plate and linkage to the throttle valve. Customer supplies intake manifold, throttle valve, barrel valve, injectors and hoses. Inquire about part prices if Morey Enterprises is to supply parts.
Air filter assembly for stock throttle valve. $45.00
High performance air filter with adapter assembly to attach to stock throttle valve. 50% discount on air filter assembly with purchase of intake/throttle valve conversion. Note: color of filter material may vary.
Coolant connection plate for back of head
A couple of different designs available to accommodate different installations (layover, chassis obstructions, etc.) Inquire about different designs and prices.
U-joint adapter. $250.00
For going to direct drive and eliminating the clutch assembly. Steel u-joint assembly with aluminum adapter to mount to Focus crank flange. Includes mounting bolts. Requires that the crank flange be tapped for 7/16-20 threads. Retapping these holes does not require crank to be removed.
Other parts available inquire about price and availability
Adjustable cam pulley: allows advancing or retarding cam 10 degrees. Timing belt kit includes timing belt tensioner, left and right idler pulleys. Head bolt or head stud sets. Electric fuel pump. Oil system accumulator.
Note: Sportsman midget car parts can be machined/fabricated for other engines. Let us know what you are working on and well help you with the parts you need.
Other Midget Parts
Front axle. Prices start at $225.00
Front axles custom made to your specifications: Widths to 50. Camber plus or minus 2 degrees or zero (10 degree spindles). Split caster. Mounting points for radius rods and shock mounts. Inquire for details.
Chromemoly (4130) fabricated radius rods, tie rods, drag links.
Your choice of length, tube size and threads. Inquire for prices.
Morey Enterprises can design and fabricate many of the components on your car, call us with your needs. We can also design and fabricate a chassis or complete car. If you always wanted to design your own car, let us help your ideas become reality.
(Note: all prices listed are US dollars and are subject to change without notice.)